This lovely Myford Super 7B is a Myford-reconditioned (2005) imperial non-power cross-feed machine and has appropriate specification: reground bed, saddle, top of cross-slide and top-slide; new (2005) TOS 3-jaw chuck (inside/outside jaws, soft jaw set); motor chip guard; new reversing push-button starter. The machine is mounted on the standard cabinet stand, and is fitted with a Myford quick-change toolpost. Included in the package are faceplate, catchplate, Jacobs tailstock drill chuck, dead centres, seven standard Dickson toolholders, two boring bar holders, a parting tool, and sundry other craftsman-made holders - including DTI mount and clamp-type knurling tool. An indexing device is fitted to the backgear, and there is an elegant saddle locking handle fitted between the saddle and the thread dial indicator. Original Myford installation and instruction booklets are with the machine, as is the 2005 reconditioning documentation.

£1,950.00

The headstock end of the bed.

The power train.

A very good Fobco pillar drill with fixed 1/2" capacity Jacobs chuck, with four speeds (425-4760rpm). The drill comes complete with original Fobco mortising attachment and collar to hold standard chisels (one of the pads is missing from the timber clamps on this attachment). £295.00

A ring sizing machine for stone set, signet or wedding rings, with set of 17 formers (one of which is flat), all in very good condition - £45.00

This ring sizing machine will expand plain or signet rings, or reduce plain rings using the rotating baseplate which has eight tapered holes of varying diameters on each side. £125.00