LATE ARRIVALS - METALWORKING 1 : METALWORKING 2
A rare piece of equipment: this pantograph engraver by Friedrich Deckel - the model G1 - was manufactured in 1927, and is still in really good condition. The worktable has some marks of over-enthusiasm, but this does not greatly detract from the usefulness of the machine. It comes complete with two sets of brand new belts, 1/4" and 1/8" cutter collets (which means that standard 1/4" shank milling cutters can be used), and a number of styli. £450.00
Front-on view of the engraver. We have replaced the possibly original motor, and the machine has been completely rewired with a NVR switch. The marking on the worktable may be seen in this view.
An Eclipse 120mm diameter magnetic lathe chuck with key, and fitted with a backplate to suit Myford Series 7 lathes. In very good condition - £85.00
A very good Record No.34 steel vice with quick-release, 4.5" wide jaws, 5" opening and 3" jaw depth - £93.00 - for collection from the shop only.
Probably unused Redex compression tester for petrol engines, boxed with standard range of accessories and instruction leaflet - £25.00
Now these are what you call a pair of wirecutters! This magnificant set of model C16 cable and steel wire rope cutters by Swiss manufacturer Felco will cut up to 16mm cable. Lots of heavy-duty uses, not least for cutting the rigging on your yacht when things go pear-shaped! The new price is over £250 and these are in virtually unused condition. Our price: £100.00
A Myford MA68 fixed vertical slide, boxed with a pair of table T-bolts, very good condition - £132.00 SOLD
A probably unused Myford No.1412 fixed steady for the Myford 7-Series lathes, boxed - £69.00
Myford No.1413 travelling steady, boxed with fixing bolt, and probably unused - £42.00
A pair of Acme taps: top - a 3/4" x 8TPI RH plug tap (note round shank), and bottom a 3/4" x 6TPI RH long taper tap. Both HSGT, in super condition - £10.00 each